
- Slats EC 102
- Anthracite grey
- Profiles RAL 7016
- Anthracite grey
Photo 1 of 7
The woven kit enables landscapers, fencing installers, distributors and outdoor development professionals to offer a durable and attractive screening solution for rigid panels.
Enhance your landscaping projects with attractive, durable screening that is easy to integrate.
Offer a solution suited to rigid panels, with a woven installation designed for lasting results.
Expand your range with a professional kit ready to offer, compatible with the main rigid panel brands.
A woven installation that holds every slat in place and supports long-lasting fencing projects.
| Fence height above ground | 1m03 | 1m23 | 1m53 | 1m73 | 1m93 |
|---|---|---|---|---|---|
| Embedment depth | 400 mm | 400 mm | 600 mm | 700 mm | 800 mm |
| Hole diameter | 300 mm | 300 mm | 350 mm | 350 mm | 400 mm |
Choose the configuration suited to your project from five heights and three colour combinations.



Project support tailored to every site, from technical validation through installation.
Ask for adviceSelect your panel details for an initial compatibility check.
This configuration must be validated by our team before installation.
Components per 2.50 m panel

Internal slats ×43
Width 49 mm

External slats ×2
Width 40 mm

Reinforcement fold profiles ×4-6
Length 1240 mm

Top finishing profiles ×2
Length 1240 mm

Internal slats ×48
Width 43 mm

External slats ×2
Width 30 mm

Reinforcement fold profiles ×4-6
Length 1240 mm

Top finishing profiles ×2
Length 1230 mm
Homogeneous, durable and attractive screening designed for rigid panels.
Our privacy kits are compatible with the leading French and European manufacturers of rigid wire panels: Dirickx, Delclo®, Clonor, Eurofence, Schertz, Place Clôtures, MRT, Betafence, Lippi, Rivisa, Clôture Arès, Heras, Tecnomallas, Cloostermans-Huwaert and Tréfilunion.



Technical requirement: rigid welded mesh panels with a horizontal wire of 5 mm minimum.
Composite privacy kit for rigid mesh panels and rigid fencing. The Redcinha® Delclo® system transforms your fence into a composite privacy screen. Since 2013, Redcinha® Delclo® has been developing PVC-free wood-composite screening solutions for professionals in fencing and outdoor landscaping.
The composite privacy slats, also called privacy laths or slats, are designed to be woven directly into the horizontal wires of rigid panels. This woven installation secures the slats evenly and helps the screening resist wind. The system provides up to 95% privacy while preserving the aesthetic of a composite fence.
Ready-to-install composite privacy kit
The kit is supplied in a "Ready to Install" carton with all elements required for installation: composite privacy slats and aluminium finishing profiles. It is available in several heights and colours to suit different privacy fencing projects, garden screening, outdoor partitions or landscape installations.
The slats are solid, mass-dyed and feature a brushed finish that closely resembles natural wood. The PVC-free wood composite is designed to withstand outdoor conditions: UV, frost, hail and humidity. The material is rot-proof and requires only limited maintenance.
Compatible with many rigid panels
This privacy slat kit for rigid mesh is compatible with the main folded rigid panels on the market, provided the horizontal wire is at least 5 mm. Slats must be woven on every horizontal wire of the panel to ensure secure retention.
For professionals, this composite privacy screen for rigid fencing is a durable solution to create an attractive screen, increase the privacy of an outdoor space and enhance an existing fence.
Technical prerequisite: folded rigid panel with horizontal wire of at least 5 mm.
Ready-to-install carton containing everything needed: slats and aluminium finishing profiles. Compatible with the main folded rigid panels on the market (horizontal wire min. 5 mm).
Installation is strongly recommended on panels with a horizontal wire of at least 5 mm. Slats must be woven on every horizontal wire.



Not automatically. The Redcinha® Delclo® woven kit is documented for folded rigid panels 2.50 m long, in 45- or 50-mesh formats. The instructions specify a minimum horizontal wire diameter of 5 mm and strongly advise against panels with 4 mm wire.
The brand alone does not validate the configuration. Before ordering, record the panel reference, length, height, mesh count, folds and horizontal wire diameter. Also have the posts, fixings and anchors checked. For an unidentified panel or one outside these formats, have the measurements and photos reviewed before choosing the kit.
Check the number of meshes across the panel, its length and its reference: 45 meshes and 50 meshes refer here to two panel formats, not to mesh widths in millimetres. For a 2.50 m panel, the product sheet distinguishes:
The slats are 4 mm thick. Each carton also contains 2 top profiles and 2 bottom profiles in aluminium. If you are unsure about the existing panel, provide its reference, measurements and a photo before ordering rather than choosing on the basis of brand alone.
The kit should only be installed after the panel, posts, fixings and anchoring have been checked, because adding privacy screening increases wind load. The instructions discourage posts with base plates unless the base plate is welded directly to the post, as in the Delclo® configuration described. Even in that case, they recommend a maximum height of 1500 mm; above that, post embedment is mandatory, regardless of the support.
For the stated above-ground fence heights, the product sheet and instructions specify the following dimensions:
This table alone does not validate soil conditions, a low wall or an existing anchorage. Have the actual configuration and site exposure checked before installation.
On this Redcinha® Delclo® composite kit, the slats must be woven through every horizontal wire of the folded rigid panel. It is not the straight installation with self-supporting slats used for the Ultimate® kit: each product reference has its own product sheet and installation instructions.
The woven kit instructions offer two weaving directions suited to the panel height. They can create a uniform pattern or an alternating 1-1 or 2-2 pattern. At 1m73, follow the diagram that matches the actual mesh arrangement above and below the folds. Do not transfer compatibility conditions or instructions from a straight-installation kit to this woven kit.
The instructions do not support promising an installation without equipment or preparation. They specify personal protective equipment, including gloves, a mask and safety glasses, as well as a utility knife. The fencing work and any optional anti-theft accessory must be prepared separately.
The stated sequence is: fit the bottom profile, weave the slats, then fit the top profile. Installing the bottom profile before the panel is recommended. Place the external slats at the ends and weave the slats through every horizontal wire, following the diagram for the relevant height. If the slats have an orientation feature, chamfered corner or hole, depending on the version, position it at the bottom inside the lower profile. Consult the woven kit instructions in the technical documentation on this page before starting.
The product sheet includes the wording “does not flap in the wind”, but gives neither an allowable wind speed nor a test classification for the complete fence. This wording must not be treated as a guarantee under all exposure conditions or as evidence of superiority over another system.
The instructions require the slats to be woven through every horizontal wire and emphasise post embedment because of wind load. Stability also depends on the panel, the posts, their fixings, the substrate and the site. Have the whole assembly checked before installation; weaving cannot compensate for inadequate anchoring.
It is the anti-theft screw system offered as an optional extra in the woven kit product sheet. It complements the privacy screen but is not included in the standard carton contents.
Have the reference and installation method confirmed before ordering: the woven kit product sheet and instructions do not describe how it is installed. Therefore, do not promise that it can be installed without tools, that the slats cannot be removed, or that it protects against all theft.
The product sheet lists 5 heights, 1m03, 1m23, 1m53, 1m73 and 1m93, and 3 slat colours: anthracite grey EC 102, light grey EC 103 and light brown EC 401. This list does not confirm that every combination of height, mesh format and colour is in stock; have the combination confirmed when ordering.
The profiles paired with EC 102 and EC 103 slats are anthracite grey RAL 7016. For EC 401, the product sheet lists olive brown profiles RAL 8008 until stocks are exhausted, then beige brown RAL 1011. Do not assume the colour of the supplied profiles: have it specified for your order or for a fence extension.
Before installation, store the slats on a dry, flat surface, protected from UV and heat, in a well-ventilated place, as required by the woven kit instructions.
A colour change may occur in the first few weeks of exposure. A slat added later may differ in colour; differences may also persist between slats or production runs. The colours and brushed finish of samples are not contractually binding. The instructions recommend ordering the entire project at once to limit batch mixing. For an additional order, provide the colour and details of the original order, without promising a perfect match.
The woven kit requires low maintenance, not zero maintenance. The instructions recommend washing once a year, ideally in spring, with a pressure washer, keeping a minimum distance of 1 m.
The slats do not require a protective treatment. Do not use solvents or apply oil, wood stain or paint. For surface stains, the instructions specify a ready-to-use product containing diluted bleach. Give the customer these care instructions together with the kit manual, rather than promising that no cleaning will be needed.
The product sheet and installation instructions for the woven composite kit state a 10-year warranty. The instructions specify that failure to follow their installation requirements voids the warranty: provide the instructions with the product and check the terms applicable to the purchase.
This period is neither a promise of service life nor automatic coverage for all damage or any change in colour. For a warranty claim, have the case assessed under the applicable terms, without promising replacement or a refund in advance.