Photo 1 of 4

Professional documentation

Published files and resources to request when preparing a quote, specification or installation.

Additional documents

Kit composition

Inner steel slats
43 slats, each 52 mm wide
End steel slats
2 slats, each 43 mm wide
Included lower profiles
2 PVC lower profiles, 1.24 m each; no separate upper profile
Packaging
Per kit or by the pallet of 50 kits

Check whether my panel is suitable for 3D STYLE

Measure these dimensions on the panel, not just from its brand or nominal mesh size. Tick only the criteria you have verified.

Description

The 3D STYLE Delclo® kit, distributed by Paysapro, screens a compatible rigid panel using slats made from galvanised steel with a coating on both faces. The kit was designed in France. The slats have a 3D profile and a matt anthracite grey RAL 7016 finish. The datasheet states a minimum of 95% screening; the appearance varies with viewing angle and lighting.

Straight installation on a compatible panel

The datasheet states approximately 9 min for one person and one compatible panel 2.50 m wide, using the standard installation method without tools, excluding preparation and trimming. Check the support, engage the lower profiles on the bottom horizontal wire, insert the end slats followed by the inner slats, and check that they are seated and aligned. Spacers are not supplied: the instructions specify 2 to 3 per side, only for a panel with a window cut-out.

Care and trimming

Wash with plain water or a mild pH-neutral detergent, then rinse thoroughly. Avoid abrasives, solvents, acids, chlorinated products and pressure washing at close range. Promptly remove dirt that retains moisture. Protect scratches that reach the anti-corrosion protection layer with a suitable protective paint. Trimming the slats is strongly discouraged: it voids the commercial warranty, even after paint touch-up.

Limited commercial warranty

The Delclo® document provides 2 years of coverage for manufacturing, material or assembly defects and perforation caused by corrosion. Coverage is subject to purchase from an authorised reseller, installation and maintenance in accordance with the document, and its exclusions, including damage in saline environments. This period is neither a service life nor a warranty against every trace of rust.

Our team's advice

Screening increases wind loading. On an existing fence, check the fixings, post anchoring, ground clearance and lateral gaps. Select the support to suit the exposure and ground conditions: the embedment guidance in the instructions is not a structural design calculation. In saline environments, particularly within 10 km of the coast, the instructions recommend wood-plastic composite; this distance does not guarantee the steel's performance beyond it.

Key features

Slats made from galvanised steel with a coating on both faces and a 3D profile
One colour only: matt anthracite grey RAL 7016
Three heights: 1.23 m, 1.53 m and 1.73 m
One carton for one compatible panel

Technical specifications

Brand
Delclo®
Slat materialGalvanised steel with a coating on both faces
Installation typeStraight installation; approximately 9 min for one person, without tools, under standard conditions, excluding preparation and trimming
Supporting panel3D rigid panel with a V-shaped fold, with a height suited to the slats
Panel width2.50 m
MaintenanceClean water or a mild pH-neutral detergent, then rinse; no pressure washer at close range
Limited commercial warranty2 years: manufacturing, material or assembly defects and perforation caused by corrosion, subject to conditions; damage in saline environments excluded

Privacy screening for rigid fence panels

Composite Privacy Kit - Woven Installation

Composite Privacy Kit - Woven Installation

  • Up to 95% privacy
  • Wind-resistant (does not flap)
  • PVC-free composite designed for outdoor use (UV, frost, hail, rot-proof)
Bestseller
Ultimate® Privacy Kit - Straight Installation

Ultimate® Privacy Kit - Straight Installation

  • Installation in under 5 minutes
  • Tool-free installation thanks to factory pre-mounted inserts
  • Ready-to-install carton
PVC Privacy Kit - Straight Installation

PVC Privacy Kit - Straight Installation

  • High-quality PVC, anti-UV treated
  • Quick installation in approx. 9 minutes, straight mounting without clips or tools
  • Simple and intuitive system

FAQ

Start with a 2.50 m single-wire rigid 3D panel with V-shaped folds. Check 45 slat positions, 50 mm of clear space between vertical wires and a fold depth of 26 to 29 mm separately. Flat and double-wire panels, and panels with a 20 cm-high reinforcing fold, are excluded. The guide recommends 5 mm horizontal wire and advises against 4 mm. The brand or nominal mesh size alone is not sufficient.

Measure the actual panel height and check the fitting clearance at the bottom and sides. List the number of compatible panels for each height (1.23 m, 1.53 m or 1.73 m). If you are unsure about compatibility, send the measurements and a photo showing the panel and its fold.

Allow one kit per compatible 2.50 m panel. The box includes the slats and two bottom profiles; mesh panels, posts, fixings, anchoring materials and shims are not included. Packaging is listed as an individual kit or a pallet of 50 kits; this does not establish a minimum order.

The fitting guide strongly advises against cutting the slats. Cutting voids the commercial warranty, even after a paint touch-up. Check the panel dimensions before choosing the kit.

Adding screening increases the wind load. Check the support, its fixings and anchoring for the ground conditions and exposure. In saline environments, particularly within 10 km of the coast, the guide recommends wood composite. This distance is not a guarantee of steel performance beyond it.

The limited two-year commercial warranty covers manufacturing, material or assembly defects and perforation due to corrosion, not every sign of rust. The document’s conditions include purchase from an authorised dealer and compliant installation and maintenance. Damage in saline environments is excluded.

Interested in this product?

Access distributor pricing and exclusive partnership terms. Our team responds within 24h.