New 2026
Reverse 100 composite decking board
- Board: 2 900 × 138 × 23 mm
- Front anthracite grey / Back wengé
- Next-generation co-extruded wood composite
Photo 1 of 2
Description
A 200 mm composite decking board
The Reverse 200 composite decking board, reference RD-TERR-200, is a co-extruded composite wood board measuring 2 900 × 200 × 25 mm. Its width is 200 mm and it features a caramel front and a wengé back.
A co-extruded, reversible composite board
The Reverse 200 is a reversible co-extruded board. Its finish has a pronounced brushed wood relief and the indicated expansion is 2 mm/m. Either the caramel face or the wengé face can be selected as the visible side depending on the desired appearance.
Pack per m² and accessories
The documented per-square-meter pack groups boards, joists, clips, screws and plugs. The technical data sheet also lists a solid composite joist, starter and joining clips, a Torx starter kit, an aluminium angle, a finishing skirting, decking pedestals, geotextile and LED spots; verify the composition applicable to the project.
Installation of the Reverse 200 decking
Installation must follow the Reverse installation manual applicable to the project. Structural rules, fixing, expansion allowances and installation requirements are to be checked in that documentation prior to the site. The 10-year warranty stated in the manual is conditional on compliance with its installation instructions.
Maintenance of the composite board
The technical data sheet and the installation manual should be consulted for maintenance and applicable precautions. They currently specify different distances for high-pressure cleaners; no specific distance is reproduced here.
Reverse 200 or Reverse 100?
Both references belong to the Reverse range without one variant being presented as superior. Reverse 100 measures 2 900 × 138 × 23 mm, with an anthracite grey front and a wengé back. Reverse 200 measures 2 900 × 200 × 25 mm, with a caramel front and a wengé back.
A range for professionals
Paysapro provides resellers and installers with the Reverse technical data sheet and installation manual to prepare quotes, specifications and sites.
Reversible co-extruded board 2 900 × 200 × 25 mm, 200 mm wide, caramel front and wengé back.
Key features
Reverse 200 board: 200 mm width
Format 2 900 × 200 × 25 mm
Co-extruded, reversible composite wood board
Caramel front / wengé back
Pronounced brushed wood relief finish
Indicated expansion: 2 mm/m
Documented per-m² pack: boards, joists, clips, screws and plugs
Technical specifications
Brand
ReferenceRD-TERR-200
Board dimensions2 900 × 200 × 25 mm
Width200 mm
Expansion2 mm/m
FinishPronounced brushed wood relief
MaintenanceConsult the technical data sheet and installation manual
Warranty10 years subject to compliance with the installation manual
Compatibilities
Associated accessories
Solid composite joist (40x25x2900 mm)
Stainless steel starter clips (each)
Black PE joining clips (200 units)
Screws (200 units)
Nylon concrete plug (each)
Torx starter kit (15 clips + 15 screws + 5 drill bits + 3 bits)
Aluminium angle (30x48x2000 mm)
Composite finishing skirting (10x71x2000 mm: wengé, caramel or anthracite grey)
Decking pedestals (10-20 mm / 18-36 mm / 35-60 mm / 60-115 mm / 115-220 mm)
Geotextile (roll 2x25 m: 200 or 400 g/m²)
LED spot blue or white (set of 5: 40x40 mm)