The Myriad® cladding is a co-extruded composite wood cladding system with a slatted effect, suitable for exterior façades as well as interior spaces. The technical data sheet documents horizontal or vertical installation, with a board 2 900 mm long, 160 mm wide and 26 mm thick.

Its composition is indicated as 55% wood, 30% high-density polyethylene (PEHD) and 15% additives. The brushed finish aims for a natural appearance; documented colours are Anthracite grey EC 102, Wenge EC 017 and Light oak with black grooves EC 401B.

A system to prepare with its profiles

The installation guide describes the accessories required for singular points: starter profile, external corner profile, cover board and interior/exterior aluminium profiles for window and door surrounds, aluminium clips and stainless steel TX10 screws. Angles and openings must be laid out and treated according to the installation instructions.

The reported expansion is 2 mm/m. The substrate, battens, tolerances, fixings and layout must be defined according to the installation manual; failure to comply may void the warranty. Boards and accessories must be stored on a dry, flat surface, protected from UV, in a ventilated place. Do not use solvents, wood stain oil or paint.