
Barred Fence
- Asymmetrical design: modern and innovative fencing
- Rigid and stable structure thanks to the high number of tubes
- 41 vertical tubes Ø 15 mm: 19 tubes/m
Photo 1 of 6
K-Dag Hybride is a 3D welded steel panel manufactured in France, with 55 × 200 mm mesh, a standard V reinforcement fold and a nominal width of 2 500 mm. Its vertical wires are Ø 4.00 mm and horizontal wires Ø 5.00 mm, each with a 5 % tolerance. K-Dag TitanPro uses Ø 5.00 mm in both directions and has a different height range.
NANO coating is combined with an 80 µm polyester powder coating. The sheet describes nanoscale pores that improve paint adhesion to the metal surface; it supplies neither a warranty duration nor a quantified test result.
Compatible with all fence posts on the market. Compatible with the entire Paysapro range of privacy-screening solutions for rigid mesh fencing. This range compatibility does not universally validate wind exposure, anchoring or every height/kit combination. Check the complete assembly and installation for the site.
1030 mm, 1230 mm, 1530 mm, 1730 mm, 1930 mm. 50 panels per pallet and per height. Packaging is not a minimum order quantity or a stock indication. Anthracite grey RAL 7016, Black RAL 9005, Green RAL 6005. Other RAL colours: On request.
Associated brands: Kosedag® and Delclo®.
Common Gamme K-DAG Standard sheet dated 05/11/2026: panels on p.1, posts and accessories on p.2. Post lengths are not panel heights.
Select posts, fixings and screening for the height and site conditions. The common sheet gives no weights or number of folds or clips per height: do not extrapolate them.



K-Dag Hybride is a 3D welded steel panel manufactured in France, with 55 × 200 mm mesh, a standard V reinforcement fold and a nominal width of 2 500 mm. Its vertical wires are Ø 4.00 mm and horizontal wires Ø 5.00 mm, each with a 5 % tolerance. K-Dag TitanPro uses Ø 5.00 mm in both directions and has a different height range.
NANO coating is combined with an 80 µm polyester powder coating. The sheet describes nanoscale pores that improve paint adhesion to the metal surface; it supplies neither a warranty duration nor a quantified test result.
Associated brands: Kosedag® and Delclo®.
Nominal width: 2 500 mm.
1030 mm, 1230 mm, 1530 mm, 1730 mm, 1930 mm. 50 panels per pallet and per height. Packaging is not a minimum order quantity or a stock indication. Anthracite grey RAL 7016, Black RAL 9005, Green RAL 6005. Other RAL colours: On request.
Select posts, fixings and screening for the height and site conditions. The common sheet gives no weights or number of folds or clips per height: do not extrapolate them.
Mesh: 55 × 200 mm. Reinforcement fold: Standard V fold. Select posts, fixings and screening for the height and site conditions. The common sheet gives no weights or number of folds or clips per height: do not extrapolate them. Common Gamme K-DAG Standard sheet dated 05/11/2026: panels on p.1, posts and accessories on p.2. Post lengths are not panel heights.
Compatible with all fence posts on the market. K-DAG Multifix post with clips. K-DAG Multifix post with notches. Compoplak® base panel. K-DAG Multifix welded baseplates. Metal fixing clips. Common Gamme K-DAG Standard sheet dated 05/11/2026: panels on p.1, posts and accessories on p.2. Post lengths are not panel heights.. Select posts, fixings and screening for the height and site conditions. The common sheet gives no weights or number of folds or clips per height: do not extrapolate them.
Compatible with all fence posts on the market. Compatible with the entire Paysapro range of privacy-screening solutions for rigid mesh fencing. This range compatibility does not universally validate wind exposure, anchoring or every height/kit combination. Check the complete assembly and installation for the site. This range includes Redcinha® Delclo® woven composite kits and straight-fit Ultimate® kits. Consult the selected kit's sheet and instructions for its height and installation requirements. Select posts, fixings and screening for the height and site conditions. The common sheet gives no weights or number of folds or clips per height: do not extrapolate them.
Check the complete assembly of panel, posts, fixings and anchors, not just the wires. The documented post variants can be embedded in concrete or fitted with a base plate where one is specified; this does not mean every height or supporting surface is suitable for a screened fence. Have the substrate, exposure and installation design checked before adding a kit. For an existing fence, identify the post reference and have the fixings, any corrosion and visible deformation inspected. The Hybride product data sheet does not specify a permissible wind speed for every assembly, so no universal wind-resistance claim is made.
Prepare a plan for each fence run showing lengths, corners, start and end points, changes in level and access. Specify the panel height, RAL colour, exact post model and fixing method, any base panel, and the desired screening kit. A 2500 mm panel length is not the post centre-to-centre spacing: have the panel layout drawn up using the selected fixings rather than simply rounding the total run length. If adding to an existing fence, include photographs and measurements. Use the quote request on this product page to submit these details.