# Reverse 100 composite decking board

Reference: RD-TERR-100
Brand: Redcinha®
Category: Wood-composite decking
## A co-extruded composite decking board The Reverse 100 is a co-extruded wood composite decking board measuring 2 900 × 138 × 23 mm. It features an anthracite grey face and a wengé face, with a textured brushed wood appearance. The technical sheet specifies thermal expansion of 2 mm/m. ## Two colours on a single board The board is reversible: the front is anthracite grey and the back is wengé. The choice of face is made according to the layout selected for the project. ## Pack per m² and accessories The documented pack per m² gathers boards, joists, clips, screws and plugs. Aluminium angles and finishing skirtings are part of the system elements; check the reference and the fixings specified in the documentation before ordering. ## Installation and recommendations The installation manual is authoritative for the structure and implementation. For Reverse 100 it specifies a maximum centre-to-centre between joists of 350 mm, i.e. 310 mm between joists, support points under joists every 400 mm maximum, double joisting at end joints and a 5 mm gap at each board end. Pre-drilling is required. Store components on a dry, flat surface in a ventilated area, protected from UV and heat, and take boards out progressively during installation. ## Maintenance For maintenance and full instructions, refer to the installation manual. Do not use solvents, stain oils or paint. ## A solution for professionals Reverse 100 enables preparation of a professional project with its datasheet, manual, documented pack per m² and quote request. It differs from Reverse 200 by its 138 mm width and anthracite grey / wengé faces; Reverse 200 is 200 mm wide and offers caramel / wengé faces.
## Documented specifications
- Board dimensions: 138 x 2900 x 23 mm
- Expansion: 2 mm/m
- Finish: Textured brushed wood appearance
- Maintenance: Consult the manual for full instructions
- Warranty: 10 years
## Documented features
- Board: 2 900 × 138 × 23 mm
- Front anthracite grey / Back wengé
- Next-generation co-extruded wood composite
- Textured brushed wood appearance
- Specified expansion: 2 mm/m
- UV-treated, frost resistant
- Documented pack per m²: boards, joists, clips, screws and plugs
- Installation and storage instructions to be checked in the manual
Documented options and colors: Anthracite grey (Front), Wengé (Back)
## Documented compatibilities
- Terrace Reverse 200: same family, 200 mm width, front caramel / back wengé
## Documented accessories
- Solid composite joist (40x25x2900 mm)
- Stainless steel starter clip (each)
- Black PE joining clips (200 units)
- Screws (200 units)
- Nylon concrete plug (each)
- Starter kit Torx (15 clips + 15 screws + 5 drill bits + 3 bits)
- Aluminium angle (30x48x2000 mm)
- Co-extruded composite finishing skirting (10x71x2000 mm: wengé or anthracite grey)
- Decking pedestals (10-20 mm / 18-36 mm / 35-60 mm / 60-115 mm / 115-220 mm)
- Geotextile (roll 2x25 m: 200 or 400 g/m²)
- LED spot blue or white (set of 5: 40x40 mm)
Details: Dimensions, pack components and installation rules must be verified in the technical datasheet and the manual for the selected reference.