# Myriad® cladding

Reference: RD-MYRIAD
Brand: Redcinha®
Category: Composite cladding and facade covering
The Myriad® cladding is a co-extruded composite wood cladding system with a slatted effect, suitable for exterior façades as well as interior spaces. The technical data sheet documents horizontal or vertical installation, with a board 2 900 mm long, 160 mm wide and 26 mm thick. Its composition is indicated as 55% wood, 30% high-density polyethylene (PEHD) and 15% additives. The brushed finish aims for a natural appearance; documented colours are Anthracite grey EC 102, Wenge EC 017 and Light oak with black grooves EC 401B. ### A system to prepare with its profiles The installation guide describes the accessories required for singular points: starter profile, external corner profile, cover board and interior/exterior aluminium profiles for window and door surrounds, aluminium clips and stainless steel TX10 screws. Angles and openings must be laid out and treated according to the installation instructions.
## Documented specifications
- Length: 2900 mm
- Width: 160 mm
- Thickness: 26 mm
- Composition: Wood 55 % · PEHD 30 % · additives 15 %
- Finish: Brushed effect for a natural appearance
- Expansion: 2 mm/m
- Maintenance: Pressure washer, minimum distance 1 m
- Warranty: 10 years
## Documented features
- Documented for interior or exterior installation
- Choice of horizontal or vertical installation
- Wood 55% / PEHD 30% / additives 15%
- Cover board and dedicated profiles for window and door surrounds
- Brushed effect for a natural appearance
- UV-treated, frost-resistant (does not crack in freezing conditions)
- Rot-proof; reported expansion 2 mm/m
- 10-year warranty
Documented options and colors: Anthracite grey EC 102, Wenge EC 017, Light oak + black grooves EC 401B
## Documented accessories
- Solid composite batten (40x25x2900 mm)
- Cover board (15x280x2400 mm): for window/door surrounds
- Aluminium profile for interior fixing of cover board (2400 mm: RAL 7016/8028)
- Aluminium profile for exterior fixing of cover board (2400 mm: RAL 7016/8028)
- External corner profile (2000 mm or 2900 mm)
- Aluminium clips + stainless steel TX10 screws 3x20 mm
- Starter profile (2000 mm or 2900 mm)
- Stainless steel screws TX10 20 mm
Details: The reported expansion is 2 mm/m. The substrate, battens, tolerances, fixings and layout must be defined according to the installation manual; failure to comply may void the warranty. Boards and accessories must be stored on a dry, flat surface, protected from UV, in a ventilated place. Do not use solvents, wood stain oil or paint.