# K-Dag Double-Wire Rigid Panel

Brand: Kosedag®
Category: Steel fencing: rigid panels and bar fencing
The K-Dag double-wire rigid panel under the Kosedag® brand combines two parallel horizontal wires and one vertical wire. The notation is horizontal / vertical / horizontal: 6/5/6 mm corresponds to two horizontal Ø 6 mm wires and one vertical Ø 5 mm wire; 8/6/8 mm corresponds to two horizontal Ø 8 mm wires and one vertical Ø 6 mm wire. The datasheet table states a 5% tolerance. Both sections offer the same ten panel heights: 630, 830, 1 030, 1 230, 1 430, 1 630, 1 830, 2 030, 2 230 and 2 430 mm. The main mesh is 50 × 200 mm and the standard length is 2 500 mm. Other lengths of 2 000 / 3 000 mm and other meshes of 50 × 100 and 55 × 200 mm are offered, with dimensions adapted to the project. These options do not guarantee all combinations or stock availability. The galvanization is declared as EN 10244-2, class D, 50 g Zn/m². The NANO treatment improves the coating's adhesion to the metal surface; it is associated with 80 µm electrostatic polyester powder coating. The datasheet declares TSE-EN 10218-2 for the wire, TSE-EN 10223-7 for the panel and EN 10245-4 for the coating, with a tensile strength of 450 to 650 N/mm². These declared standards do not constitute third-party certification or CE marking; no warranty period or corrosion class is stated here. The datasheet states compatibility with all posts on the market, subject to installation conditions. Multifix clip posts can be used up to and including a panel height of 2,030 mm; for 2,230 and 2,430 mm, use notched posts. Check the site, wind exposure, anchors and the conditions specific to each privacy-screening kit. The 3D STYLE steel kit instructions exclude double-wire panels. Standard colours: anthracite grey RAL 7016, black RAL 9005 and green RAL 6005; other RAL colours are available on request. The photo illustrates the Double Panel range without identifying the section or colour. Uses listed in the datasheet: residential housing, hotels, parks, highways, public buildings, sports complexes and industrial areas. These are cited uses, not security approvals.
## Documented specifications
- 6/5/6 mm
- 8/6/8 mm
- 6/5/6 mm section (horizontal / vertical / horizontal): Two horizontal Ø 6 mm wires and one vertical Ø 5 mm wire
- 8/6/8 mm section (horizontal / vertical / horizontal): Two horizontal Ø 8 mm wires and one vertical Ø 6 mm wire
- Stated tolerance: 5%
- Main mesh: 50 × 200 mm
- Standard length: 2 500 mm
- Other lengths offered: 2 000 / 3 000 mm, depending on the project
- Other meshes offered: 50 × 100 and 55 × 200 mm, with project-specific dimensions; combinations to be confirmed
- Galvanization: EN 10244-2, class D (50 g Zn/m²)
- Coating: NANO + 80 µm polyester powder coating
- Declared wire standard: TSE-EN 10218-2
- Declared panel standard: TSE-EN 10223-7
- Declared coating standard: EN 10245-4
- Tensile strength: 450 to 650 N/mm²
- Multifix clip limit (panel height): Up to and including 2 030 mm; for 2 230 and 2 430 mm, use notched posts
- Other RAL colours: On request
## Documented features
- Two parallel horizontal wires and one vertical wire
- Two H/V/H sections: 6/5/6 and 8/6/8 mm, 5% tolerance
- Ten shared heights from 630 to 2 430 mm
- Main mesh 50 × 200 mm, standard length 2 500 mm
- Class D galvanization and NANO + 80 µm polyester finish
- Compatible with all posts on the market, subject to installation conditions. Check privacy-screening compatibility by kit; 3D STYLE is excluded from double-wire panels.
Documented options and colors: Anthracite grey RAL 7016, Black RAL 9005, Green RAL 6005
Documented heights: 630 mm, 830 mm, 1030 mm, 1230 mm, 1430 mm, 1630 mm, 1830 mm, 2030 mm, 2230 mm, 2430 mm
## Documented compatibilities
- All posts on the market
- Other Paysapro kits: check each product sheet. The 3D STYLE steel kit is incompatible with double-wire panels.
- Multifix clip posts for panel heights up to and including 2 030 mm
- Multifix notched posts for panel heights above 2 030 mm
## Documented accessories
- K-Dag Multifix clip posts (for panel heights up to and including 2 030 mm) and notched posts
- K-Dag Multifix welded base plates
- Metal fixing clips
- Black plastic hook caps
- Wall brackets for rigid panels
- Installation spacer
- Mailbox support (as specified in its own datasheet)
- Compoplak® base panel (depending on the post system and its own datasheet)
Details: K-Dag Double Panel datasheet dated 09/11/2026: panel p.1, posts, accessories and uses p.2. The section, height and colour must be confirmed for the project; no price or stock information is provided. Post lengths are not panel heights.
Professional tip: Multifix clip posts: for panel heights up to and including 2 030 mm. For panel heights of 2 230 and 2 430 mm, use notched posts. Check wind conditions, anchoring and the height/kit assembly at the site; accessory-specific limits still apply.
## Technical documentation
[K-Dag Double-Wire Rigid Panel](https://www.paysapro.fr/docs/fiche-k-dag-double-panel.pdf)

SHA-256: 328066c44d73f563243bc911cc215e2af47b43d25511cd3b2650375b96b74622
